Floor-mounted safety guardrail
We manufacture ANANKE Ground guardrails that anchor directly to the surface, using a base that adapts to the structure.
Aluminum
Profiles
110 cm
Minimum height
We meet the standards
- UNE-EN 14122-3
- Made in Spain
— Our models
Four ANANKE Models for Every Type of Anchoring
Each ANANKE guardrail is designed for a specific surface (counterweighted, sheet-mounted, floor-mounted, or wall-mounted). Choose yours or ask us for technical advice.
01 / ANANKE
ANANKE Weight
Counterweighted guardrail
- Installation flexibility
- Preserves the base structure
- Easy relocation
- Durability
02 / ANANKE
ANANKE Plate
Sheet-mounted guardrail
- High strength and durability
- Quick, easy installation
- Adaptability
- Low maintenance
03 / ANANKE
ANANKE Wall
Wall-mounted guardrail
- Space saving
- High stability
- Easy installation
- Discreet appearance
04 / ANANKE
ANANKE Ground
Floor-anchored guardrail
- Great strength and service life
- Quick, easy installation
- High structural stability
- Attractive appearance
— ANCHORING AND FASTENING
How the Guardrail Is Fastened to the Floor
The base is anchored to the floor or parapet using 2 M10 mechanical anchors, or resin if necessary.
Anchored guardrail
It is installed after the concrete has cured, using a base bolted down with a mechanical anchor or chemical anchor. It is the most flexible option in terms of timing, because it does not depend on the construction phase, although its final strength depends on the condition of the existing concrete.
Guardrail fastened to the metal structure, tramex type
The floor base is back-plated against the tramex structure by means of a rod on its underside, thus joining the floor base to the metal structure, which is very useful for walking areas where the project already includes a tramex-type walkway.
Floor-Mounted Guardrail Manufacturer in Spain
We design and manufacture your floor-mounted guardrail to suit your project.
All of our production takes place in Spain. This allows us to control quality, offer tight lead times, and customize any project without extra costs.
24h
Quote response
48/72h
Shipping after quote acceptance
— Where is it installed?
Edge Protection for Every Surface
Safety guardrails for roofs, walkways, and any elevated area with a fall hazard, in any situation that requires direct anchoring to the structural support.
Roofs, factories, and shopping centers
Perimeter protection on walkable concrete roofs, industrial buildings, and shopping centers, where the floor can be drilled and is strong enough for the anchoring.
Walkways and technical platforms
Guardrails anchored to the surface on walkways and access platforms, where firm flooring allows the base to be fixed with a chemical anchor without needing a counterweight.
Openings and roof parapets
Protection around rooflights, interior openings, and roof parapets without side fastening, anchored directly to the roof or concrete parapet.
Other environments
Maintenance areas, logistics areas, machines, silos, and vertical structures.
— QUOTE
Request a Price for Your Floor-Mounted Guardrail
Tell us the linear meters, whether the structure is already finished or is new construction, and the project location.
- No obligation Fixed quote in writing
- Technical advice included in the offer
- Financing available for businesses
611 14 24 46
Mon–Fri · 7:00 AM to 3:00 PM · Direct technical support
Tell us about your project
We will reply within 24 business hours.
Everything You Need to Know About the Floor-Mounted Guardrail
What Is a Floor-Anchored Guardrail and When Is It Used?
A floor-anchored guardrail is a collective protection system, within the fall arrest system required by work-at-height regulations, that fastens its base directly to a rigid surface using a plate and a mechanical or chemical anchor. Unlike the counterweighted guardrail, which does not penetrate the surface, here there is drilling: the strength of the floor determines the anchor calculation before installation.
It is used on walkable concrete roofs, technical rooftops, access slabs, and any perimeter where the floor can be drilled and is strong enough to absorb the horizontal load on the handrail. We manufacture the range in aluminum profiles, with handrail and intermediate tube in 3-meter bars and posts every 1,500 mm, like the rest of the models in the family.
Standards and Testing for the Floor-Mounted Guardrail
We test and certify ANANKE Ground in accordance with the UNE-EN 14122-3 standard. The test is performed by DEKRA Testing and Certification GmbH, an independent laboratory, with a report available for your project documentation or for the site inspection.
The certification covers the behavior of the assembly (guardrail, base plate, and anchor) under horizontal load on concrete. It does not replace a specific calculation when the actual strength of the concrete is uncertain; in those cases, our technical team reviews the slab data sheet before defining the type of anchor and the distance between anchors.